We may earn compensation from reviewed products. Learn about our editorial policies.
This article is written in partnership with Linkind. All thoughts are my own.
If you’ve driven through an American suburb in December, you’ll have seen it. One house has a roofline of perfectly spaced, colour-shifting lights – no wonky strings, no extension leads draped over the gutter – and every other house on the street suddenly looks a bit… 2009.
That house almost certainly has permanent outdoor lights. You put them up once, they live tucked under the eaves all year, and you change what they do from your phone. Christmas, Halloween, the Fourth of July, game day, or just a nice warm white for when you pull onto the drive after work.
Linkind (pronounced ‘Lin-kind’, for the record) have just launched their latest take on the idea: the Linkind Smart Permanent Outdoor Lights ColorBlend. It’s a 200ft kit with 120 light heads, and it does something I haven’t seen on this kind of product before. Each head has two lights in it, not one. Let me explain why that matters.
At a glance
| Length | 200ft |
|---|---|
| Light heads | 120 |
| Brightness | Up to 12,000 lumens (100 lm per head) |
| Colour | 16 million colours + tunable white (1800K-6500K) |
| Beam angles | 50° + 100° dual-beam optics |
| Weatherproofing | IP67 lights, IP65 controller |
| Operating temperature | -4°F to 104°F |
| Connectivity | Wi-Fi (2.4GHz), Bluetooth, Matter |
| Works with | AiDot app, Alexa, Google Home, Apple Home, SmartThings |
| Price | $699.99 at launch ($100 off) |
Two light zones in every head

Most permanent lights are one LED in a little housing, firing a single splash of colour down the wall. Fine, but flat.
Linkind call their version AuraScape multi-zone lighting. Every head on the Linkind Smart Permanent Outdoor Lights ColorBlend has two downward-facing light sources: one with a tighter 50° beam, one with a wider 100° beam. The smaller zone sits nested inside the larger one, and each can be set to its own colour or switched on and off independently.
On the wall below, that gives you a layered, fish-scale glow – two arcs of light stacked on top of each other, running the length of the roofline. It’s a bit like a Wes Anderson set designer got hold of your guttering.
Up close, each head is a compact white housing with two lenses sitting side by side, one per zone. Small, white and tucked under the soffit, they’re designed to blend into the eaves during the day, which is exactly what you want from something that stays up all year.
Four ways to combine the zones

Because the zones are independent, Linkind have built four basic combinations you can apply across a single head or a whole run of them:
| Dual-Lit | Both zones on in every head |
|---|---|
| Consecutive | The same zone stays lit across neighbouring heads |
| Symmetrical | The outer heads use one zone, the centre head uses the other |
| Alternating | The lit zone switches from head to head in a repeating sequence |
Those are starting points, not the limit. Add two contrasting colours and things get interesting quickly – red and green for Christmas, orange and purple for Halloween, your team’s colours on game day. You build it all in the AiDot app under Color > Edit Canvas, where you tap individual zones and paint them one by one.

Put two contrasting colours on a real roofline and you can see what Linkind are going for. Instead of a row of identical splashes, each head throws a tighter pool of one colour inside a wider wash of another. It’s the difference between a house that’s simply lit and one with a bit of depth to it.
Brightness and white light


120 heads at up to 100 lumens each works out at 12,000 lumens across the 200ft run. That’s a lot of light for the outside of a house – enough, Linkind say, for larger homes and two-storey rooflines – and it means the colours still look punchy rather than washed out.
The bit I think matters more for most people, though, is the white. The Linkind Smart Permanent Outdoor Lights ColorBlend go from a candle-ish 1800K all the way up to a crisp 6500K daylight white. That’s what makes permanent lights worth it for the other ten months of the year: a warm, welcoming glow on a Tuesday evening, or brighter white when you actually need to see the drive.
120+ presets (yes, plenty for Christmas)

If you don’t fancy designing anything yourself, there are more than 120 preset effects in the AiDot app, spanning holidays, parties, seasons and everyday ambience. Christmas is well covered, as you’d hope from something launching in late October.
For those who do fancy designing, there’s a DIY mode for building your own static or moving effects. And then there’s Dotis, Linkind’s AI lighting tool. You type (or say) what you want – ‘slow twinkling candy cane red and white’, say – and it generates the effect for you. There’s music sync too, plus schedules so the lights come on at dusk and go off at midnight without anyone touching a phone.
Linkind’s own example is a good one: tell Dotis you want ‘a cheerful vibe’ and it comes back with a rainbow flow and a brighter, blinking palette, ready to apply. No colour wheels involved.
It plays nicely with everything else, too. Alexa, Google Home, Apple Home (via Matter) and SmartThings are all supported. Which means ‘Alexa, turn the house green’ on St Patrick’s Day is a real sentence you can now say. Who am I to judge?
Installation

I’ll be straight with you: this is a proper DIY job, not a hang-it-on-the-gutter-hooks job. That’s kind of the point of ‘permanent’.
Linkind’s process goes like this. Measure your eaves and mark the peaks and corners. Connect and test every string on the ground first (do not skip this). Then work along the roofline: the included positioning card sets each head 2-4 inches from the wall, you drill a hole and fit an anchor, peel the genuine 3M VHB adhesive, press the head into place and drive a screw through it. The adhesive is there for extra support – the screw does the real holding. Cable clips tidy the runs between heads.
One power adapter handles up to 12 strings – 120 lights, 200ft – and setup in the AiDot app needs a 2.4GHz Wi-Fi network. Note that the lights cannot be cut to length, but they can be extended, and necessary accessories such as extension cords are already included with the product.
Once it’s up, it’s built to stay up. The lights are IP67-rated, the controller IP65, the housings are UV-resistant, and the operating range runs from -4°F to 104°F. Linkind’s own tip for cold-weather installs: warm the adhesive and mounting surface gently first, so it bonds properly.
If you’re not comfortable on a ladder (and at 45, I’m increasingly aware of my own mortality up there), get a pro in for the afternoon. You only have to do it once, after all.
Who it’s for
One install, a different look for every occasion
If you’ve been eyeing up a neighbour’s roofline and want yours to stand out next holiday season, this is very much aimed at you. The dual-zone heads mean it won’t look like a copy of theirs, either.
Families get a lot out of it too. Letting the kids pick tonight’s Christmas look from the app is a lot easier than untangling last year’s lights in the garage.
And if you’re the type who switches it up all year – Halloween, the Fourth, the big game, then warm white for everyday – that’s where a permanent system really pays for itself.
Verdict
Linkind Smart Permanent Outdoor Lights ColorBlend
$699.99 (launch price, $100 off)
✅ Pros:
– Two independently controlled light zones in every head
– Up to 12,000 lumens across 200ft
– 1800K-6500K tunable white for everyday use
– 120+ presets, plus DIY and AI-generated effects
– Screw-plus-3M VHB mounting built for year-round use
– Works with Alexa, Google Home, Apple Home and SmartThings
❌ Cons:
– Needs a 2.4GHz Wi-Fi network for setup
– If using screw mounting, installing means drilling into your eaves
Permanent lights aren’t a new idea, but the Linkind Smart Permanent Outdoor Lights ColorBlend bring something genuinely different to them. The two-zone heads give a roofline depth that single-LED systems can’t match, the white range makes them useful all year, and the presets mean you never have to design anything unless you want to.
The trade-off is the install. You’re drilling into your house, and you’ll want to plan it properly. But that’s the deal with any permanent system, and Linkind’s screw-and-adhesive mounting is designed so you only do it once.
Linkind are knocking $100 off during launch, which brings the 200ft kit to $699.99. You can grab it on Amazon or find out more on Linkind’s website.
More permanent lights from Linkind
Linkind make a couple of other permanent outdoor lights worth knowing about:
- Smart Permanent Outdoor Lights PatternChange (HP6X) – Linkind’s newest system, launching around October 26, 2026. If you’re after pattern-based effects specifically, this is the one built for them.
- Smart Permanent Outdoor Lights FlexMount (HP5S) – another option in Linkind’s permanent lighting range.
Let me know in the comments what you’d light your house up for first – and whether you’re Team Warm White or Team Full Disco.



